Before publishing the Adloop script, you need to check it is correctly triggered!
The verification of the script is very easy and will take only a couple of minutes.
On the GTM preview mode, access your website.
Click on the F12 button of your computer or right-click > Inspect to open the Console and go to the Network tab. In the filter box, type “collect?”
Then reload your page using CTRL+R, still with the Console being open.
Find the line with “pageview” in it and click on it to open it.
In the Payload tab, scroll down until you find the list of custom dimensions. They are indicated as cd1, cd2, cd3 etc. Find the custom dimension(s) that you created for Adloop.
Now, the custom dimension that you created should be filled with an Adloop code, that looks like this:
1ed2bf2f-1706-47ff-c3c8-1865373dcd9a:Ep0hc|DR|/
If your custom dimension is not filled with a value, then there is something wrong with the step. Check carefully once again that you followed every step of our Adloop script installation guide. You can also contact our Customer Success team that will be able to assist you with the script installation!